As shown in the picture above, the customer’s vehicle model is a 12v traditional fuel car with a cabin of 2.2X1.5X1.2m about 4 cubic meters. Temperature requirement is 0 to +5°C, transport dairy products.

First of all, the model of the car is small, we need to help the customer to confirm whether the car has a place to install the compressor.

The compressor needs to be installed next to the engine, and the compressor needs to be connected to the engine pulley to obtain power from the engine to drive the compressor.

After confirming with the customer, install the compressor in this position.

V-200C engine drive reefer units, cooling capacity is about 1700W(0℃, R134a refrigerant, Roof-mounted unit and slim evaporator design, it is suitable for customer’s requirements.

After confirming the compressor, we recommend V-200C engine drive reefer units, cooling capacity is about 1700W(0℃), R134a refrigerant, Roof-mounted unit and slim evaporator design, it is suitable for customer’s requirements.

The power of the V-200C refrigeration unit is 300-400w, and the customer will use it 4-6 hours a day, and there is only a 12V48Ah battery in the car, so he needs to install a 150A battery to ensure he can use it 4-6 hours a day. The customer is very satisfied with this solution

We are very professional in refrigeration units and can help customers make perfect refrigeration solutions according to their vehicles model. We not only have engine drive units, but also full electric units suitable for vans and trucks, whether it is low voltage or high voltage. We are also very good at diesel units and mobile trailer units. If you have a cooling problem with your vehicle model, please contact us.